Line Camera Selection Tool

1. Input Parameters

Target Width (mm)

Detection Accuracy (mm)

Movement Speed (mm/s)

Required Working Distance (mm)

Camera Type

Black & White

Color

2. Select Camera

Recommended Cameras

3. Select Lens

Line Scan Lens

4. Configuration Calculation Results

Lens Focal Length:0 Resolution MTF30:0 Flange Back Focal Diff:0 Magnification Diff:0 Actual Magnification:0 Camera Flange Distance:0 Lens Magnification:0 Lens Flange Distance:0 Actual Working Distance:0 Camera Chip Size:0 Required Working Distance:0 Lens Image Circle:0

Lens Interface: -

Camera Interface: -

Required Flange Distance: 0

Adapter Rings Total Length: 0

Remaining Gap: 0

5. Select Adapter Rings (Total length should be close to required flange distance)

Lens Holder

Focus Tube

Extension Ring

Other Adapter Ring

Fixed Drive Shaft Radius

Change Drive Shaft Radius

Actual Drive Shaft Radius (mm)

Actual Encoder Frequency (c/s)

To get the correct image ratio, configure the system with the following parameters

Actual Encoder Precision (Pulse Count): 0 Count/s

Need to modify Drive Shaft Radius to: 0 mm